Austin Audio started in 1996. We have been ​serving central Texas for 19yrs.

  • The T1-B and similar remotes have an On/Off switch. Simply remove the back cover and switch the remote off and back on to reset it. 
Powering On/Off the T2i/T2x

NOTE: During normal operation, powering the T2i/T2x off should not be necessary.

TO POWER THE T2i/T2x ON:

• Press and hold the “Backlight” button and the “OK” buttons simultaneously until the T2i/T2x powers on (Approximately 1-2 seconds).

OR

• Place the T2i/T2x in the docking station - this will automatically power the T2i/T2x on. (Docking station does not need to be powered).

TO POWER THE T2i/T2x OFF:

• Press and hold the “Backlight” button, then press the “OK” button for approximately 5 seconds until the T2i/T2x powers off.


RESETTING THE T2i/T2x:

• Press and hold the “Backlight” button, then press the “OK” button for approximately 12 seconds until the T2i reboots. ​


  • Simply removing the back cover and taking the batteries out and putting them back in will reset the SURFIR remote. 
T1-B/Surfir